Ken Tool 39760-98 Strapwinder User Manual

Instructions for use

Instructions for Use

KEN-TOOL ● 768 E. North Street ● Akron, OH 44305

Toll Free: 888-536-8665 ● Fax: 800-872-4929 ● Phone: 330-535-7177 ● 330-535-1345

E-mail: [email protected] ● www.kentool.com

39760 STRAP WINDER

KT39760-98

NEW

QUICK WIND

QUICK TORQUE

QUICK TIRE CHECK

QUICK CHEATER BAR

1. Lay the cinch strap out, away from the trailer.
2. Position one of the holes in the barrel of the strap axle on top.
3. Hook the “spinner” of the Strap Winder down through that top hole,

from the outside, and twist it counter clockwise so that the tip of the
spinner sits in the end of the barrel.

4. Using your left hand to straighten and guide the strap, turn the strap

axle barrel with the Strap Winder using a push-pull motion of the right
arm.

5. After rewinding, use the notched end of the Strap Winder to firmly

secure the strap in place.

NOTICE:

The strap winder is not intended for use in securing cargo.
Always use approved leverage bars for securing cargo loads.