Ken Tool 30171 13 PC. HUBCAP & WHEEL LOCK REMOVAL KIT User Manual
13 pc. hubcap & wheel lock removal kit, Instructions for use

PART NO. 30171
13 PC. HUBCAP & WHEEL
LOCK REMOVAL KIT
768 E. North Street ● P. O. Box 9320 ● Akron, Ohio 44305
Toll Free: 888-536-8665 ● Fax: 800-872-4929
Phone: 330-535-7177 ● Fax: 330-535-1345
E-mail: [email protected] ● www.kentool.com
Quickly remove wire wheel cover locks with variable inside drive keys on GM, Ford and Chrysler
products.
Easily removes aftermarket wheel locks without damaging the lock or stud.
Quickly remove large GM cover locks with variable inside drive keys.
Easily remove Corvette, GM “M” and “F” body wheel locks (GrandAm, Firebird,
Bonneville, Olds Calais, Buick Regal).
Removes and replace GM, Ford, Chrysler and McGard hubcap locks and aftermarket wheel lug
locks...
without keys...without waiting!
GUARANTEED: For one full year against defects in materials and workmanship.
INSTRUCTIONS FOR USE:
Sockets
ARE NOT TO BE HAMMERED/POUNDED onto wheel lock. Simply apply pressure against wheel
lock while either running impact gun in reverse, or turning ratchet/wrench counterclockwise with removal
socket attached.
NOTE:
When using socket with smooth tapered inside profile, run impact gun clockwise for 10 seconds heat-
ing up wheel lock and socket. This will create a temporary shrink-fit bond.
Pause for 10 seconds.
Change direction of impact gun to counterclockwise/reverse and, while applying pressure against the
wheel lock, run the impact gun to remove wheel lock. Sometimes a breaker bar and hand turning will
give better results.
MADE IN USA
Kit Includes: ● GM Hubcap Lock Remover ● GM Sprocket Hubcap Lock Remover ● Ford and
Chrysler Hubcap Lock Remover ● Large Universal Locking Lug Nut Remover ● Large Wheel Cover
Lock Remover ● Oversized Wheel Lock Remover ● Corvette, GM “M” and “F” Body Wheel Lock
Remover ● Stripped 18MM Lug Nuts, Corvette & GM Lock Remover ● 19MM, 3/4” Damaged Wheel
Lug & Overized Wheel Lock Remover ● 7/8” Damaged Wheel Lug & Oversized Wheel Lock Remover
● Lug Nut Remover Punch ● 3” Extension ● Durable Plastic Carrying Case ● Directions for Use.