INSTEON In-LineLinc Relay (Dual-Band) (2475SDB) Manual - Manual (Page 3)

Page 3 of 12 2475SDB - Rev: 1/21/2014 7:58 AM
About In-LineLinc Relay
In-LineLinc can be installed in-line for lighting fixtures, providing INSTEON control to individual fixtures.
Additionally, In-LineLinc eliminates the need for a conventional light switch – reducing “switch sprawl”
common to automation projects. You can also use In-LineLinc as an INSTEON signal repeater and phase
bridger (like an Access Point, #2443). In-LineLinc Relay Dual-Band supports voltages from 120 to 277V,
and loads up to 20 Amps, making it the perfect energy saving, wireless controller for commercial building
automation systems.
Features & Benefits
• Once installed, setup is easy – links to other INSTEON devices in minutes
• Controls resistive and inductive loads up to 20 Amps or incandescent loads up to 1800 Watts
• Status LED and beeper shows INSTEON setup mode activity
• Communicates simultaneously over both radio frequency (RF) and the power line
• Acts as an access point for RF-only INSTEON devices
• Stores setup state in memory so settings aren’t lost during power outages
• Wires into standard J-boxes (requires a NEUTRAL connection)
• Two-year warranty
Set button
Off button
On button
LED