INSTEON On/Off Module (Dual-Band) (2635-222) Manual - Manual (Page 14)

14
Multi-Unlinking or Removing a Scene
2
3
One at a time, press and hold the
set button on each scene member
until it double-beeps.
Tap the set button on your
INSTEON controller to exit Multi-
Unlinking mode.
1
On your INSTEON controller, press
and hold the set button until the
device beeps. Press and hold the
set button again, then tap the set
button.
®
NEW
X
A
B
C
®
®
®
Your INSTEON controller will no longer
control your INSTEON responders.
X