Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 53)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 53
Alphanumeric
characters The following alphanumeric characters can be obtained using the
Titration Managers Keypad:
Table 1: Entering alphanumeric characters
Amount unit Unit of the amount of standard used to calibrate the titrant. The stand-
ard can be expressed as a weight (g or mg) or a volume (ml or µl).
Enter in:
Edit reagent > Standard
Applied signal
(AC/DC) Specifies the current type (alternative AC or direct DC) to be sent to
the Pt-Pt socket on the Titration Manager. The AC signal frequency is
1.67 Hz. This option is available if mV(i>0) has been selected for
Measurement in the Edit method or Edit reagent menus.
Enter in:
Method parameters menu
Reagent parameters menu
Archives data
lost - Cal. Data
lost - Methods
kept Instrument internal failure. Only the method parameters have been
kept.
Keys Characters
7 7, A, B, C, a, b, c, @
8 8, D, E, F, d, e, f
9 9, G, H, I, g, h, i
4 4, J, K, L, j, k, l
5 5, M, N, O, m, n, o, µ
6 6, P, Q, R, p, q, r
1 1, S, T, U, s, t, u
2 2, V, W, v, w
3 3, X, Y, Z, x, y, z
0 0, -, +, *, ^, =, #, <, >, .
space, /, (, ), [, ], |, ?, !, %, °