Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 107)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 107
Electrode
window This window contains all the information and operations concerning
the electrodes.
To access:
Use LEFT/RIGHT arrow keys.
Electrodes are
different This message appears if the active electrode used for the reagent
calibration is different from the electrode used in the method.
Check the method and reagent calibration parameters menus.
Empty burette 1. Enter the Burette functions menu.
2. Select the burette in the Address field, see "Address", page
51 .
3. Press 2 Empty. The burette is emptied at maximum speed
(approximate emptying time: 25 s).
Empty
sequence Involves removing the methods present in the sequence.
Proceed as follows:
1. Select the sequence to be emptied, see "Select sequence", page
204 .
2. Press 2 Sequence/Sample stack then 3 Edit sequence.
3. Press 3 Delete.
4. Press 2 Delete sequence then
✓ to confirm or press Esc to leave
the screen without emptying the sequence.
To remove a particular method from a sequence, see "Remove
method from a sequence", page 176 .