Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 243)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 243
Inputs/outputs
2 indicator electrode inputs.
1 reference electrode input.
Selectable polarised input from -1 mA to 1 mA in 1 µA steps, DC or AC.
Differential input.
Temperature input.
0-5 V TTL output.
0-12 V TTL output.
TTL input to start analysis.
Serial connections for Printer/PC, balance and additional titrator for use with
TitraMaster 85 PC Software.
Serial connection for sample changer.
PS/2 port for PC keyboard and/or barcode reader.
General specifications
Casing:
Fully splashproof chemical resistant latene®.
Graphic 128x128 dot LCD protected from spillages with TPX® cover.
Soft-touch alphanumeric keypad (silicone).
Languages:
English, German, Danish, French, Italian, Spanish, Swedish.
Dimensions (H x W x D):
380 x 230 x 450 mm (excl. tubing).
Weight:
5 kg (excluding reagent bottles).
Power requirements:
115 Vac (±10%) or 230 Vac (±10%)
50...60 Hz - 45 VA
On/Off power switch
Mains fuses:
T1A L250V, slow blow (2 fuses)
Secondary fuses:
T4 A, 230 V (1 fuse)
The secondary fuse is mounted on the printed circuit board. If necessary, contact a Ra-
diometer Analytical representative for replacement of the fuse, as the
instrument casing must be opened.