Hach-Lange TSS EX1 sc - Manual (Page 15)

15 15 15
Section 4 Operation
4.1 sc controller operation
The sensor can be operated with all sc controllers. Become familiar with the functionality
of the sc controller before using the sensor. Learn how to navigate the menu and execute
the corresponding functions.
4.2 Sensor setup
When the sensor is connected for the first time, the sensor serial number is displayed as
the sensor name. The sensor name can be changed as follows.
1. Open the MAIN MENU.
2. Press SENSOR SETUP and confirm.
3. Select the corresponding sensor and confirm.
4. Select CONFIGURE and confirm.
5. Press EDITED NAME and confirm.
6. Edit the names and confirm to return to the CONFIGURE menu.
Complete the system configuration in the same way by defining settings for the following
menu items:
• MEAS UNITS
• PARAMETERS
• RESPONSE TIME
• LOGGER INTERVAL
7. Go back to the MAIN MENU or the Measurement mode display.
4.3 Sensor data logger
A data storage unit and an event memory unit are provided for each sensor. The data
storage unit stores measurement data at predefined time intervals, while the event
memory unit stores events such as configuration changes, alarms and warning
conditions. Both storage units can be output in CSV format (refer to sc controller manual).