beautypg.com

2 usb-b client adapter cable, 6 connection to mains power supply, Connection to mains – Hach-Lange ORBISPHERE 410 User Manual User Manual

Page 28: Usb-b client adapter, Ation (see

background image

26

Installation

3.5.2 USB-B client adapter cable

3.6 Connection to mains power supply

3.6.1 Power supply connection (low voltage instruments)

For low voltage instruments (10-30 VDC), connection to the mains power supply is with a 7-pin
BINDER connector (supplied).

Note:

The connectors are grooved to avoid an incorrect fitting to the instrument.

Connect the power cable to the connector as follows:

Figure 9 USB-B adapter cable

This supplied cable is needed to connect the
instrument to a PC.

Connect to the instrument, and connect the
USB connector to the USB outlet on the
user’s PC.

Figure 10 BINDER connector

Pin Connections:

2) Power 10-30 VDC

5) Ground

7) Earth

1 + 3 + 4 + 6) Unused

See also other documents in the category Hach-Lange Equipment: