Clear-Com ICS-22 - Manual (Page 17)

Vitec Group Communications
ICS-22 Speaker Panel Instruction Manual 2 - 1
QUICK START
1. Unpack the unit and inspect it for any damage that may have
occurred during shipping.
2. Set the option switches to the default (up) position.
3. Connect the RJ-45 connector to the Matrix frame.
4. Connect 14- to18-VAC power to the two-terminal, plug-on
connector.
5. Install the ICS-22 into the USA standard four-gang outlet box.
6. Set listen levels and sidetones (see Figure 1-2 on page 1-8).
7. The speaker panel should now be operating properly.
8. Read the rest of this manual for further information.
• Users can use the
“Quick Start”
approach to get their
panels up and
running in minutes.
• Note: When the
panel is initially
powered, the
call-waiting lamp will
blink slowly indicating
the panel is
attempting to
communicate with the
Matrix frame. Once
communication is
established, the
blinking will stop.
2