beautypg.com

Supplied item checklist, Application guidelines functional description, Specifications – Hydrotech Reverse Osmosis Drinking Water System c_w Booster Pump and Inlet Solenoid User Manual

Page 4

background image

2

Supplied Item Checklist

Out of the box, your new R.O. System should be supplied with the following items. If any items appear to be missing, please

contact the distributor who sold the system.

1. Storage tank & right angle shut-off valve with compression nut

2. Reverse Osmosis Manifold comes with Booster Pump

3. Reverse Osmosis membrane element, 5 micron pre-filter, pre-

carbon filter, carbon filter (in individual sealed protective bags)

4. Filter sump wrench, drain line saddle assembly, tubing bundle,

feed water saddle piercing valve, quick faucet adapter

5. Faucet

Figure 1 - Supplied items

Application Guidelines

Functional Description

Feed water enters the 5-micron pre-filter, which filters out suspended particles such as dirt or sediment. The filtered water

then enters the pre-carbon filter, which contains granular activated carbon, which removes any chlorine from the water.
The water then enters the reverse osmosis membrane. The membrane will allow only permeate (product water) to pass

through. The brine (waste water) goes to the drain.

(1)

Nominal product water ratings are based on the following conditions: Supply TDS of 250 ppm

softened tap water, 50 psi (0.36 Mpa), 77°F (25°C), pH 8 and 15% recovery with outlet to

atmosphere.

(2)

Rejection percentages are dependent on the supply conditions and the substance being measured.

Notes: The performance of a reverse osmosis membrane is highly dependent upon pressure,

temperature and TDS. The actual volume of product water and rejection percentage will vary with

differences from the test conditions that membrane ratings are based upon.
These drinking water systems are not intended to be used for the treatment of water that is

microbiologically unsafe or of unknown quality.

Specifications

Model

Number

Membrane

Type

Max. Feed

Water Salinity

Feed Water

Temperature

Feed Water

Pressure

Feed Water

pH

Feed Water

Supply

Feed Water

Hydrogen Sulfide

Feed Water

Manganese

Feed Water

Iron

Feed Water

Hardness

EBP75TFCS-3

TFC

2000 ppm

40-110°F

50-100 psi

2.0-11.0

Chlorinated

Unchlorinated

None

< 0.05 ppm

< 0.1 ppm

< 10 gpg

Model

Description

Membrane

Production Rate

(1)

Rejection

(2)

Storage Tank

Capacity US Gal

EBP75TFCS-3

75 USGPD

up to 99%

4.0