beautypg.com

Product water faucet installation – Hydrotech Reverse Osmosis Drinking Water System c_w Booster Pump and Inlet Solenoid User Manual

Page 11

background image

9

PRODUCT WATER FAUCET INSTALLATION

New Faucet Installation

Refer to Faucet Site Preparation, selection on the last page.

1. Lower faucet into mounting hole and place faucet over hole.

2. Install washer, spacer, faucet washer, and nut onto faucet nipple below sink and snug them up. Be sure to properly

align faucet before tightening. Do not over tighten.

3. Install faucet connector. Apply food grade teflon tape, packaged with faucet, onto faucet nipple. Install 3/8” blue tube

into faucet connector.

4. Install 3/8” blue tube into RO module.