ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 28)

26
Email to [email protected] Enter the email
address for the
recipient who receives
the email alert.
SD CARD SETTING
Formatting your memory card will ERASE all the data from it and you
will not be able to get the data back. Please back up your video files
BEFORE
formatting the memory card.
Note: The system is optimized to Class 10 memory card. Memory card with lower
specification will decrease the recording and playback function efficiency.
During format process, all recording & viewing will stop until format process completes.
OVERWRITE SD CARD
This function will overwrite the oldest files when the micro memory card
is full. Turning on this function will enable the system to start overwriting
the old files when the available memory card capacity is not enough. This
ensures the most up to date video recordings can be saved so that you
won’t miss any important information.
Note: You will want to reformat the memory card from time to time to ensure the
condition of the storage device. Your camera system will not work properly if the
memory card become corrupted.
PROFILE SETTING
This function allows you to save the following customized settings of
camera. This is useful if you want to apply the same settings to another
WAPP camera quickly. You won’t have to make all settings for each camera
manually.
Time zone Vido setting Sensitivity setting
Email setting Overwrite Setting
DEVICE INFORMATION
This section shows the device information about the camera, including
device version, total size and available size of the memory card.