ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 21)

19
SETUP PIN LOCK
(iOS) (Android)
If you enable PIN Lock, the user will be asked to enter the PIN code when
you launch the APP.
1.
Enable the “Enable lock when starting” function. Then enter your PIN
code.
2.
Confirm your PIN code again.
Note: If you forgot your PIN code, please uninstall the APP and reinstall it on the
mobile device.
NOTIFY (PUSH NOTIFICATION)
The WAPP camera supports motion detection function. When any event is
detected in the camera site, you’ll receive push notification on the mobile
devices for the event recognized by the camera.
For iOS
If you want to enable/disable it, please follow the steps on your iOS mobile
device: