ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 11)

9
1.
Make sure the mobile device you are using is connected to the same
Wi-Fi router the camera is connected to.
2.
Locate the “OMGuard HD” icon in your mobile device and launch the
App.
3. Tap the ADD CAMERA icon to add a new camera. Then click
the SEARCH button for a quick setup. The APP will search available
camera(s) connecting to the Wi-Fi router and display the camera
information in the pop up list. Select the camera from the list and the
APP will automatically add the camera’s DID code to the DID column.
Enter the default password 123456.
(iOS) (Android)
Note: After you have entered the default password, the APP will remind you to
change the default password.
4.
Click SAVE to complete the camera settings. The system confirms the
user identity and grants permission to user access.
5.
You can refer to "ADD CAMERA" section for detail on adding additional
camera(s).