ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 26)

24
Envi r onment Mode
The Environment Mode settings allows you to select the power line
frequency used at the location of WAPP camera. The power line frequency
varies depending on geographic region. It may cause image flicker if
wrong frequency is selected. Please check with local authorities for proper
setting.
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image
by providing 5 levels to select from (5 = brightest).
WI-FI SETTING
The Wi-Fi setting allows you to choose the wireless connection and setup
the Wi-Fi environment.
When you tap the “Manage Wi-Fi network” button, the system
automatically scans the nearby network and shows the available Wi-Fi
routers in the drop-down list. Choose the appropriate Wi-Fi router and
enter the Wi-Fi router password if necessary. Due to security concerns, it is
suggested to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note:
1.
When the Wi-Fi connection is completed and you unplug the Ethernet cable,
the camera will reboot and it will take several minutes to establish the
connection. Please re-launch the APP when you see the green signal indicator
lights up.
2.
The WAPP camera is designed to work with the legal Wi-Fi channels in your
region. Please refer to your Wi-Fi router manual to choose an appropriate
channel for WAPP camera.
3. If camera fails to connect to the Wi-Fi router, please hold down reset button
for 2 seconds to reset the system and repeat register process again.