ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 24)

22
ADMIN PASSWORD
The Admin Password is a specific security code for administrator to
change the advanced settings. The default admin password is 123456.
Please use this function to change the default admin password into your
personal admin password. For the protection of your system configuration,
every time you change the advanced settings, you need to enter the admin
password. Please change the admin password periodically.
Note:
If you forgot your admin password, please long press the reset button on the camera DC
jack for 5 seconds to restore the password into factory default value 123456 (please refer
to the Camera Overviewsection). All settings will be restored to factory default. You will
need to configure your camera from the start.
EMAIL ALERT
The camera supports the motion detection function, which is capable of
detecting movements within the camera view, following with notifying
user the sudden event with push notification and/or email alert, system can
also begin recording.
When motion detection is enabled and system detects movement:
-
System will begin recording.
-
With Push Notification enabled, system will send out notification
message to user’s mobile device.
-
With Email Alert enabled, system will send out Email to alert user the
event.
Function Setting Action (when movement is detected)
Email Alert ON Camera: Start video recording
Email account: Email alert
Push Notification ON Camera: Start video recording
Mobile Device: Text notification
Motion Detection OFF Camera: Manual Recording
Email account: No action
Mobile Device: No action
Note: By default, the system has been limited to send out the email alert every 15
minutes to prevent overloading user’s email account.