ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 23)

21
ADVANCED SETTING
This chapter explains the advanced settings for administrator. Administrator
is the one who owns the administration password and has the full control to
the WAPP camera. The administrator can access all WAPP functions and
settings, while general users can receive the surveillance images for live
view/screen capture/video recording and may not manage the camera settings.
Admin Password
The security code required to enter Advanced
Setting for system setting management
Email Alert Enable / Disable receiving E-Mail alert (after
system detecting motion) on your mobile divice.
Please make sure you have setup the E-Mail
Setting correctly and have activated Motion
Detection function.
Time Zone Setup the appropriate time zone
Daylight saving Turn ON/OFF the daylight saving function.
Device Security Code The password required for remote access
Video Setting
Configure the video quality and local power
frequency
Wi-Fi Setting Manage your Wi-Fi Network
Sensitivity Setting Setup the camera sensitivity for motion detection
Email Setting Setup your email account for E-mail alert
SD Card Format Format/Setup the SD card
Profile Setting
Save the current camera settings and apply the
settings to other cameras
Device Information Check the App and API Kernel version
Note: It may take more than one minute for some routers to update the registered
devices. When you complete advanced settings and return to device list, please wait for
a while allowing your router to finish the camera registration.