Burkert Type 8070 - Manual (Page 12)

10
Assembly,Installation
7. assemBly, insTallaTiOn
7.1. assembly of Type 8022
Fig. 1 shows how Type 8022 is screwed to the sensor.
notE
for the fault-free operation of the type 8022 observe the following during installation:
• When screwing to the sensor, ensure the seal is seated correctly.
• Torque the screw to a value between 0.2 and 0.3 Nm, in order not to damage the housing. With a damaged housing, cor-
rect operation cannot be guaranteed.
Fig. 2: Installing Type 8022 on the sensor
7.2. electrical installation
The electrical connection of the device is made on a terminal strip via cable gland, or an M12 male fixed connector.
English
Type 8022