Burkert Type S030 - Manual (Page 8)

28
Material Type of connections and
standard K factors (pulse/
litre)
DN6 DN8 DN15
Stainless steel
Weld ends acc. to:
SMS 3008
- - -
BS 4825 / ASME BPE - - -
DIN 11850 Rg2 - 278 106
EN ISO 1127 / ISO
4200 - - 106
External threads acc. to:
SMS 1145
- - -
G 440 278 106
Internal threads acc. to:
G, Rc, NPT
- - 106
Clamp acc. to:
SMS 3017 / ISO 2852
- - -
BS 4825 / ASME BPE - - -
DIN 32676 - 278 106
ISO (pipe EN ISO 1127/
ISO 4200) - - 106
English 29
K factors (pulse/litre)
DN15
v2
1)
DN20 DN20
v2 1)
DN25 DN32 DN40 DN50 DN65
- - - 66,9 - 31,1 19,9 11,4
- 106 74,5 66,9 49,0 31,1 19,9 11,4
74,5 106 74,5 66,9 49,0 31,1 19,9 -
74,5 66,5 - 49,0 31,8 19,8 11,4 -
- - - 66,9 - 31,1 19,9 -
74,5 66,5 - 49,0 31,8 19,8 11,4 -
74,5 66,5 - 49,0 31,8 19,8 11,4 -
- - - 66,9 - 31,1 19,9 11,4
- 106 74,5 66,9 - 31,1 19,9 11,4
74,5 106 74,5 66,9 - 31,1 19,9 -
74,5 66,5 - 49,0 31,8 19,8 11,4 -
1) See page 27.
English 29
30
Material
Type of connections and
standard
K factors (pulse/
litre)
DN6 DN8 DN15
Stainless
steel
Flanges acc. to:
EN 1092-1 (ISO PN16)
ANSI B16-5-1998
JIS 10K
440
- 106
Brass All 440 278 106
PVC All 440 278 116
PP All - - 110
PVDF All 440 278 118
English 31
K factors (pulse/litre)
DN15
v2
1)
DN20
DN20
v2
1)
DN25 DN32 DN40 DN50 DN65
74,5 66,5 - 49,0 31,8 19,8 11,4 -
74,5 66,5 - 49,0 31,8 19,8 11,4 -
84,7 75,3 - 52,9 28,5 17,3 10,2 -
89,9 74,2 - 52,9 28,4 17,4 10,1 -
90,3 78,0 - 57,0 31,7 19,0 10,9 -
1) See page 27
7. inSTAllATion
Safety instructions
danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut-off the pressure
and drain the pipe before loosening the process
connections.
English 31