Burkert Type S030 - Manual (Page 13)

48
spare parts order code
With PVDF paddle-wheel, EPDM
seal, screws and certificate, for
DN15 (except DN15 v2 and
DN20 v2) to DN65
432 301
Two versions of the S030 in DN15 and DN20
exist, having different K factors.
Only version 2, identified by the "v2" marking, is
available from March 2012. The "v2" marking can
be found:
• on the bottom of the DN15 or DN20 fitting in
plastic:
V2
• on the side of the DN15 or DN20 fitting in metal:
V2
English 49
spare parts order code
set of o-rings (dn6 to dn65) for metal fittings
FKM
426 340
EPDM 426 341
set of o-rings in fkm for plastic fittings
DN08
448 679
DN15 431 555
DN20 431 556
DN25 431 557
DN32 431 558
DN40 431 559
DN50 431 560
set of o-rings in epdm for plastic fittings
DN08
448 680
DN15 431 561
DN20 431 562
DN25 431 563
DN32 431 564
DN40 431 565
DN50 431 566
English 49
50
Metal fitting Plastic fitting
Fig. 6: Position of O-rings in an S030 fitting
10. pAcKAGinG, TRAnSpoRT
attention
damage due to transport
• Transport may damage an insufficiently protected part.
• Transport the fitting in shock-resistant packaging and
away from humidity and dirt.
• Do not expose the fitting to temperatures that may
exceed the admissible storage temperature range.
English 51
11. SToRAGe
attention
poor storage can damage the fitting.
• Store the fitting in a dry place away from dust.
• Storage temperature of the S030 fitting:
Paddle-wheel
material Body fitting material Storage
temperature
PP • Stainless steel
• Brass
• PVDF
• PP -15 °C...+80 °C
• PVC -15 °C...+60 °C
PVDF • Stainless steel
• Brass
• PVDF -15 °C...+100 °C
• PP -15 °C...+80 °C
• PVC -15 °C...+60 °C
English 51