English, 3 programming mode – Burkert Type 8623 User Manual

Page 14

Text mode
Original mode

12 - 8623

english

Move to the next position.

After reaching the last value, exit the programming mode:
You will return to the Standard mode.

When you leave the Programming mode, the currently-set
values will be saved, and a Reset carried out.

Attention: any current control function will be interrupted!

NOTE:

Hold the key down for 2 seconds.
The control unit is now in the programming mode.
Each position can be individually adjusted in the sequence of
Paragraphs 7.3.2 to 7.3.9.

Change the currently-adjusted value (blinks).

7.3

Programming mode

As only the control unit Type 8623-B is in the Programming
mode, the flow controller continues to work with the old values
until the Programming mode is exited.

NOTE: