English, 3 parameters – Burkert Type TAT002 User Manual
Page 8

6 - 0911
english
2.3
Parameters
Hy
Hysteresis
0.1 K + 25.5 K / 1°F + 255°F
Cooling
with SET+HY relay on
Heating
with SET-HY relay on
*PTB
internal value
*rel
internal value
Pbc
type of sensor
Ptc = PTC; ntc = NTC
dAO
Alarm delay at
0 ... 24 hours; Resolution 10 min
with Mains ON
Time duration after start of installation
during which no alarm situations have
been indicated
HIGHEST STORED TEMPERATURE
Briefly press the button
once.
The message
Hi and and then the display of the
maximum temperature appear.
You can return to the normal display by pressing any
button, or by waiting 5 seconds.
RESET THE MAXIMUM AND MINIMUM TEMPERATURE
You can acknowledge the stored value by holding
the SET button down now for longer than 3 seconds,
until the message
rST appears on the display.
The message
rST blinks as confirmation.
LOCKING AND UNLOCKING THE KEYPAD
Hold down the buttons
and
for at least 3
seconds. The message
POF appears on the
display. The keyboard is locked. You can only view
the set-value and the minimum and maximum
temperature. The
POF message also appears if you
hold down a button for longer than 3 s.
The keyboard will be unlocked if you hold down
the buttons
and
for 3 s.
NOTE
When commissioning for the first time, reset the maximum and
minimum temperature.