Burkert Type TAT002 - Manual (Page 7)

0911 - 5
english
LED Mode Meaning
on Relay active
blinks
Programming level (together with LED1)
Minimum switchover time Relay active
LED1 blinks Programming level (together with )
LED MESSAGES
VIEW THE SET VALUE
Briefly press the SET button once. The set-value
display appears in the display.
Briefly press the SET button again, or wait 5
seconds in order to display the temperature.
CHANGE THE SET VALUE
Hold down the SET button for 2 seconds.
Change the set-value within 10 s with the or
buttons.
You can save the new set-value by briefly pressing
the SET button or by waiting 10 seconds.
CHANGING THE PARAMETER VALUES
Hold down the SET+ button for at least 3
seconds. (LED1 and blinking).
Select the desired parameter.
Press the SET button in order to view the defualt
value ( blinks).
You can change the default with the and
buttons.
LOWEST STORED TEMPERATURE
Briefly press the button once .
The message Hi und and then the display of the
maximum temperature appear.
You can return to the normal display by pressing any
button, or by waiting 5 seconds.