Burkert Type 6240 User Manual
Page 2
4
Intended Use
The device may only be used in the applications indicated
in this operating manual - and only in connection with third-
party devices or components recommended or permitted
by Bürkert.
Observe the instructions in this operating manual, as well
as the conditions of use and permissible data specified in
the chapter Technical Data and on the rating plate of each
device.
The device may only be used when it is in perfect condition.
The proper and safe operation of the device presupposes
correct transport and installation as well as attentive opera-
tion. Use in any other way does not constitute intended use.
Foreseeable Misuse
Do not subject the device to mechanical loads (e.g. by
using it as a support for objects, a screw-in aid, a step or
as a lever).
Do not make any alterations to the exterior of the de-
vice.
•
•
5
General Safety Instructions
DANGER!
High pressure in the system!
Working on the system poses an acute risk of
injury.
Only qualified and instructed persons may
work on the pneumatics/hydraulics of the
system.
Switch off the pressure before disconnecting
lines and valves!
Use suitable tools!
•
•
•
DANGER!
Electric voltage!
Working on the electrical equipment of the system
poses an acute risk of injury.
Only qualified personnel may work on the
electrical equipment of the system!
Always switch off the voltage and secure the de-
vice to prevent switching on before starting work.
Observe the applicable accident prevention and
safety regulations for electrical equipment.
•
•
•
6
WARNING!
Unintentional operation or unauthorized tam-
pering may lead to hazardous situations.
Take suitable measures to prevent unintentional
operation or unauthorized tampering!
•
WARNING!
Risk of burns due to the hot coil.
The coil can become very hot during continuous
operations.
Wear protective gloves!
•
WARNING!
Risk of injury due to functional failure for valves
with alternating current (AC).
A seized core can cause the spool to overheat and
lead to functional failure.
Monitor the operating process for proper func-
tioning!
•
CAUTION!
Risk of short circuit or escape of medium
through loose screw fittings.
Ensure that the seals are seated correctly.
Screw on coil and device plug socket or valves
and mounting plate carefully!
•
•
7
Scope of Supply
Immediately upon receipt of delivery, check that the con-
tents have not been damaged and that the type and scope
of the delivery matches the delivery note or packing list.
Please contact us immediately in the event of discrepancies.
Germany
Contact Address:
Bürkert Fluid Control Systems
Sales
Centre
Chr.-Bürkert-Str.
13-17
D-74653
Ingelfingen
Tel. : +49 (0)7940 - 10 111
Fax: +49 (0)7940 - 10 448
E-mail:
International
Contact addresses are found on the final pages of this
operating manual.
And also on the Internet at: