4 general information, General information – Burkert Type 2834 User Manual
Page 7

7
General information
WARNING!
General hazards!
▶ Do not use the valve fitting or the complete device as a lever to
screw the valve into the line system.
▶ Do not physically stress the device (e.g. by placing objects on it
or standing on it).
▶ Do not make any external modifications to the device housings.
Do not paint housing parts or screws.
▶ Observe the generally acknowledged safety rules for resource
planning and operation of the solenoid coil Type 7..-... and the
associated solenoid valve.
Unintentional activation or unauthorized impairment of the system
may cause general hazardous situations through to physical injury.
▶ Take appropriate measures to prevent the system from being
accidentally actuated!
▶ Do not make any unauthorized changes to the system.
The solenoid coil Type 7..-... was developed with due consider-
ation given to the accepted safety rules and is state-of-the-art.
Nevertheless, dangerous situations may occur.
Operate the solenoid coil Type 7..-... and the associated
solenoid valve in perfect working order only and in accordance
with the operating instructions.
4
GENERAL INFORMATION
4.1 Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
4.2 Warranty
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3 Information on the Internet
The operating instructions and data sheets for Bürkert products can
be found on the Internet at:
english
PTB 00 ATEX 2202 X