Burkert Type 2031 - Manual (Page 4)

4
Basic safety instructions
Type 2031 INOX
2.1 symbols
Warning to prevent death or serious injuries:
Danger!
Warns of an immediate danger!
WarnIng!
Warns of a potentially dangerous situation!
Warning to prevent moderate or minor injuries:
CautIon!
Warns of a possible danger!
note!
Warns of material damage!
Important tips and recommendations.
→
designates a procedure which you must carry out.
3 INTeNDeD use
Diaphragm valve Type 2031 INOX is designed to control the flow-rate
of liquid and gaseous media.
• Observe the permitted application conditions for using the equipment.
• Operate only when in perfect condition and pay attention to correct
storage, transportation, installation and operation.
4 BasIc safeTy INsTrucTIONs
danger – high pressure!
▶ Before dismounting the lines and valves, turn off the pressure and
vent the lines.
risk of electric shock!
▶ Before reaching into the device, switch off the power supply and
secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
risk of crushing from moving pneumatic connection!
▶ When opening and closing the device, do not touch the moving
pneumatic connection.
▶ Do not reach into the area immediately above and below the
control air connection.
risk of burns/risk of fire if used during long-term operation
through hot device surface!
▶ Do not touch the device with bare hands.
▶ Keep the device away from highly flammable substances and
media.
english