Locknut worn out. replace locknut, Rough gears. run in or change gears, Worn bearing. replace bearing – Alamo RX72 EN User Manual
Page 144: Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Oil level too high. drain oil to proper level, Gasket damaged. replace gasket, Bolts loose. tighten bolts
Locknut worn out. replace locknut, Rough gears. run in or change gears, Worn bearing. replace bearing | Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Oil level too high. drain oil to proper level, Gasket damaged. replace gasket, Bolts loose. tighten bolts | Alamo RX72 EN User Manual | Page 144 / 166 This manual is related to the following products: