Burkert Type 0353 - Manual

Operating Instructions Type 0353
Design:
3-way solenoid valve, direct acting, normally closed (Circuit
function C), normally open (Circuit function D) or mixer
function (Circuit function E).
Seal Materials and Fluids handled:
See Table1.
Fluid and Ambient Temperature:
See Table 1.
Pressure Range:
Maximum inlet pressure see label on valve.
Installation:
Before installing valve ensure that piping etc. is free of foreign
matter (metal fillings, seal materials, welding scale etc.).
Installation as required but preferable with coil uppermost.
Installation in this position tends to prevent foreign matter
remaining in core tube (increased life). Do not put any loads
on coil unit.
Type 0353: PTFE tape is recommended for sealing ports.
Mounting is accomplished by means of four M4 x 8 mm
tapped holes located on the valve underside.
Ports are coded on side of body.
Marking (example):
Body Material
BR
= Brass
SS = Stainless Steel
Seal Material
EPDM =
EPDM
NBR = NBR
FKM = FKM
EF = PTFE seat and FKM O-ring
EA = PTFE seat and EPDM O-ring
CF = FFKM seat and FKM O-ring
NN = Neoprene
Circuit Function
C =
3-way - Normally Closed
D = 3-way - Normally Open
E = Mixer Function
Recorder No.
Voltage / Frequency / Power Consumption
Maximum Pressure
Operating Instructions 0605/08_EU-EN_00893150
Table 1 Seal materials
Fluid Tempera-
tures [°F] Buna „N‰
(B) Ethylene (A)
Propylene FKM (F) Neoprene (N) PTFE (E) FFKM (C)
Air Fluid T.
Ambient
+ 14 to + 194
+ 14 to + 130 - 40 to + 212
+ 14 to + 130 + 14 to + 212
+ 14 to + 130 - 40 to + 266
+ 14 to + 130 - 40 to + 356
+ 14 to + 130 + 14 to + 266
+ 14 to + 130
Water Fluid T.
Ambient
+ 50 to + 194
+ 32 to + 130 + 50 to + 212
+ 32 to + 130 + 50 to + 212
+ 32 to + 130 + 50 to + 212
+ 32 to + 130 + 50 to + 212
+ 32 to + 130 + 50 to + 212
+ 32 to + 130
Neutral
gas Fluid T.
Ambient
+ 14 to + 194
+ 14 to + 130 - 40 to + 212
+ 14 to + 130 + 14 to + 212
+ 14 to + 130 + 14 to + 356
+ 14 to + 130 + 14 to + 266
+ 14 to + 130
Light oil Fluid T.
Ambient
+ 50 to + 194
+ 14 to + 130 + 50 to + 194
+ 14 to + 130 + 50 to + 194
+ 14 to + 130 + 50 to + 194
+ 14 to + 130
LP-gas Fluid T.
Ambient
+ 14 to + 140
+ 14 to + 130 + 14 to + 140
+ 14 to + 130 + 14 to + 140
+ 14 to + 130 + 14 to + 140
+ 14 to + 130
Steam Fluid T.
Ambient
+ 212 to + 266
+ 14 to + 130
+ 212 to + 356
+ 14 to + 130 + 212 to + 266
+ 14 to + 130
Refrigerants Fluid T.
Ambient
- 40 to + 266
+ 14 to + 130
Voltage 12V or 24V
UL / UR valid with
class 2 power supply only