Primary/secondary ide master/slave, Primary ide master/slave [auto, Access mode [auto – Asus A7V400-MX SE User Manual

Page 47

A S U S A 7 V 4 0 0 - M X S E

2 - 1 1

Primary/Secondary IDE Master/Slave

Primary IDE Master/Slave [Auto]

Primary IDE Master/Slave [Auto]
Secondary IDE Master/Slave [Auto]

Secondary IDE Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the setup BIOS automatically fills in the correct
values for the remaining fields on this sub-menu. If automatic detection
fails, this may be because the hard disk drive is too old or too new. If the
hard disk was already formatted on a previous system, the setup BIOS may
detect incorrect parameters. In these cases, select [Manual] to manually
enter the IDE hard disk drive parameters. If no drive is installed or if you are
removing a drive and not replacing it, select [None].
Configuration options: [None] [Auto] [Manual]

Access Mode [Auto]

The default [Auto] automatically detects an IDE hard disk drive. Select
[CHS] in coordination with the [Manual] setting of the Primary IDE Master in
to manually enter the hard disk drive values.

Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.

Primary IDE Master

[Auto]

Access Mode

[Auto]

Capacity

40020 MB

Cylinder

19158

Head

Sector

255

PIO Mode

[Auto]

UDMA Mode

[Auto]

Transfer Mode

UDMA 5

: Help

↑↑↑↑↑↓↓↓↓↓

: Select Item

-/+

: Change Value

F5 : Setup Defaults

ESC : Exit

→←

: Select Menu

Enter

: Select Submenu

F10: Save and Exit

Select Menu

Item Specific Help

Press [Enter] to
select.