Brooks Instrument SLA5810/20 User Manual

Page 15

2-1

Section 2 Installation

Models SLA5810 and SLA5820

Installation and Operation Manual
X-PR-SLA5800-PC-eng
Part Number: 541B091AAG
July, 2010

2-1 General

This section contains the procedures for the receipt and installation of the
instrument. Do not attempt to start the system until the instrument has been
permanently installed. It is extremely important that the start-up procedures
be followed in the exact sequence presented.

2-2 Receipt of Equipment

When the instrument is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding his liability. A
report should be submitted to your nearest Product Service Department.

Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: [email protected]
www.BrooksInstrument.com

Brooks Instrument

Neonstraat 3

1-4-4 Kitasuna Koto-Ku

6718 WX Ede, Netherlands

Tokyo, 136-0073 Japan

P.O. Box 428

Tel +81 (0) 3 5633 7100

6710 BK Ede, Netherlands

Fax +81 (0) 3 5633 7101

Tel +31 (0) 318 549 300

Email: [email protected]

Fax +31 (0) 318 549 309
E-mail: [email protected]

2-3 Recommended Storage Practice

If intermediate or long-term storage of equipment is required, it is
recommended that the equipment be stored in accordance with the following:
a.

Within the original shipping container.

Stored in a sheltered area, preferably a warm, dry, heated warehouse.

Ambient temperature of 70° F (21° C) nominal, 109° F (43° C) maximum,
45° F (7° C) minimum.

Relative humidity 45% nominal, 60% maximum, 25% minimum.
Upon removal from storage a visual inspection should be conducted to
verify the condition of equipment is "as received".