Fill-Rite TM Series Precision Meter - Manual (Page 17)

2 . 1
TM02D Parts List
2009 : 400 PSI (28 BAR) version being phased out 400 PSI 1500 PSI
REF Description QTY 28 BAR 103 BAR
1. Meter cover plate 1 CP86502 CP8625
2. Screw , cover plate (10-32 X 3/8" SHCS 303SS) 4 FS9651
Screw , cover plate (10-32 X 5/8" ALSTSHCS) FS1660
3. Meter body w ith posts, 1/4" NPT ports 1
Meter body w ith posts, 1/4" BSP ports
4. O-ring, cover plate, Teflon 1
5. Pulser retainer ('Top Hat') 1
6. Screw , pulser retainer (8-32 x 1" SHCS SS) 2
7. Lock nut 1
Standard pulser/gear set:
8. Standard Hall Effect sensor (pulser).
When used with non-FPP electronics, a PIA-300 signal
conditioner is often required.
9. Gear set: SS/Teflon bearings, 2 magnets
Nominal K Factor: 7700 PPG (2035 ppl)
Optional pulser/gear set:
8. Optional reed sw itch sensor (pulser),
For use with FPP battery powered electronic register
9. Gear set: SS/Teflon bearings, 1 magnet
Nominal K Factor: 3850 PPG (1018 ppl)
M M 0 2 P 2 0 0 9 - 0 6
K Factor (pulse resolution) is nominal . Individual flow meters vary, and are
subject to up to 3-4% shift on liquids w ith viscosity > 100 cSt.
1 GSTM02-2
1 EL5300-HE
1 GSTM02-1
1 EL5300-RS
TM02D
MP2084
MP2541
FS9540
MB99011
MB99021
SL2029
Stainless Steel