EXP Computer ThinLan 100 - Manual (Page 8)

Press to continue running the install program. The program will then
display the main menu screen. Choose “Setting Hardware” and Press to
continue with installation.
Figure 2 Main Menu
Setting Network Hardware
The Network Hardware Configuration screen displays the default setting for the
IRQ Level, I/O Base Address, and Memory location. If there is a conflict with any
of these settings, choose the setting that you want to change, press and
make the appropriate changes. If all the setting are acceptable, select Continue or
press key to return to the Main Menu.
Figure 3 Network Hardware Configuration
Select Network Operating system
After returning to the Main Menu, choose Select Network Operating System and
press . Select you network vender and press .
Figure 4 Network Type selection
The program will then confirm your selected network type and prompt you to enter
the path where the network operating files are located.
Figure 5 Network Operating System Path