EXP Computer CRW with USB 2.0 Cable - Manual (Page 28)

- 22 -
USING CD-RW WITH USB INTERFACE
To Connect The USB CD-RW To Your Computer
♦ Windows 98SE/Me/2000/XP:
1. Insert the plug of the USB cable into the Interface Connector of your drive.
2. Connect the AC adapter lead to the Power Jack (DC IN) at the rear panel of the drive. And then
attach the AC adapter to the AC power outlet.
3. Insert the port connector of the USB cable into the USB port of your computer. The LED on the
drive should be light and your CD-RW drive is now ready for use.
To Disconnect The USB CD-RW From Your Computer
♦ Windows 98SE:
1. Click on the icon on system tray, a dialog box appears beside this icon.
2. Click ‘Safely Remove 12x10x40 CD-RW – Drive (D:)’ (The name may differ from yours,
depending on what model of CD-RW drive you are using) in the dialog box.
3. Wait for few seconds until the system prompts ‘The 12x10x40 CD-RW storage device can now be
safely removed from the system’. Click OK, and then remove the USB cable from computer.
♦ Windows Me:
1. Click on the icon on system tray and a dialog box appears beside this icon.
2. Click ‘Safely Remove 12x10x40 CD-RW – Drive (D:)’ (The name may differ from yours,
depending on what model of CD-RW drive you are using) in the dialog box.
3. Wait for few seconds until the system prompts ‘The 12x10x40 CD-RW storage device can now be
safely removed from the system’. Click OK, and then remove the USB cable from computer.