EXP Computer CRW with USB 2.0 Cable - Manual (Page 14)

- 8 -
HARDWARE INSTALLATION
Note: This external CD-RW should only be powered by the AC adapter provided by manufacturer,
using an incorrect AC adapter can result in permanent and unpredictable damage to the drive.
1. Insert the plug of the USB cable into the Interface Connector of drive. Press firmly until the
Interface Connector is seated correctly.
2. Place the CD-RW drive in the horizontal position. The drive is designed to operate only in the
horizontal position. Operating the CD-RW drive in any abnormal position is not recommended.
3. Connect the AC adapter lead to the Power Jack (DC IN) at the rear panel of the drive.
4. Attach the AC adapter to the AC power outlet.
5. You are now ready to install the device drivers, please follow the related software installation guide
to install the device driver.