EXP Computer CRW with USB 2.0 Cable - Manual (Page 25)

- 19 -
6. After the necessary files are copied into your
internal hard disk, a screen will appear as the
figure, click Finish to restart computer.
7. Now the drivers have been updated. After the computer is restart and boot into Windows system,
you can connect the external CD-RW to the computer. Check ‘Device Manager’, the new drivers
should be installed as the table and figure.
Installed Device Drivers Location
Storage Adapter Bridge Module Installed under ‘Universal Serial Bus Controllers’.
The real name of the CD-RW drive
Installed under ‘DVD/CD-ROM drives’ (the name
list in the figure may differ from your CD-RW drive).
The above figure indicates the drivers have been
installed into the system that supports both USB1.1
and USB2.0 function.
The above figure indicates the drivers have been
installed into the system that supports only USB1.1
function.