EXP Computer CRW with USB 2.0 Cable - Manual (Page 18)

- 12 -
7. Windows will detect the external CD-RW and install the device driver automatically. After the
installation, you will find a new drive letter has been assigned for the drive in ‘My Computer’.
8. If the external CD-RW doesn’t appear in ‘My Computer’ or doesn’t work properly, please go into
‘Device Manager’ to check whether the devices are installed as the table and figure.
Installed Device Drivers Location
Storage Adapter Bridge Module Installed under ‘Universal Serial Bus Controllers’.
Storage Adapter Bridge Module (TPP) Installed under ‘Hard Disk Controllers’.
The real name of the CD-RW drive
Installed under ‘CDROM’ (the name list in the figure
may differ from your CD-RW drive).
The above figure indicates the drivers have been
installed into the system that supports both USB1.1
and USB2.0 function.
The above figure indicates the drivers have been
installed into the system that supports only USB1.1
function.