DE DIETRICH AWHP-2 MIT-IN-2 iSystem - Manual (Page 16)

4 Operating the appliance
4.1 Putting the appliance into operation
1. Make a note of the output and type shown on the outside module’s
nameplate.
2. Switch on the power by throwing the on/off switch on the inside
module.
3. The first time the boiler is powered up, the LANGUAGE menu is
displayed. Select the desired language by turning the rotary
button.
4. To confirm, press the rotary button.
5. The parameter TYPE displays. According to the values noted on
the outside module’s nameplate, select the type of thermodynamic
unit by turning the rotary button.
Outside module output Indoor module TYPE
From 4 to 16 kW
MIT-IN-2/E MIT AWHP E HT FR
MIT-IN-2/H MIT AWHP H HT FR
22 and 27 kW
MIT-IN-2/E MIT AWHP E FR
MIT-IN-2/H MIT AWHP H FR
Error during the start-up procedure:
4
No information is shown on the display:
Contact the professional who takes care of maintenance of the
appliance.
4
If there is a problem, the error is displayed on the screen.
¼See chapter: "Messages", page 24.
MW-M001832-2
C002366-B
Français - Deutsch - English -
Italiano - Espanol - Nederlands
- Pycck - Polski - Türk -
bar
1
1
2
2
D
STD
J I
E
0 2 4 6 8 10 12 14 16 18 22 24 20
# F % $ !
LANGUE FRANCAIS
C002286-C
4. Operating the appliance AWHP-2 MIT-IN-2 iSystem
15 31/03/2014 - 7616372-001-02