DE DIETRICH TWH 200E - TWH 300E - TWH 300EH - Manual (Page 14)

n Indicator of the water volume available
When producing domestic hot water, the display indicates the number
of baths available and the level to which the tank is filled (quantity of
hot water available).
4
The number of baths is calcuated based on a domestic hot water
temperature of 40°C.
4
The level to which the tank is filled is calculated according to the
set point temperature.
3.2.3. Browsing in the menus
1. Press the MENU key. The SE nS 1 menu is displayed
(Temperature measurement).
2. Use the ( and ) keys to scroll through the menus (See table
below).
3. To access the selected menu, press the MODE key (B).
4. To go back to the previous display, press the key MENU.
5. To go back ty the main display, press once key MENU.
Accessing the menu Menu Description See chapter
1x MENU SE nS
1 Measurements menu
¼ "Reading out measured values", page 14
1x ) CL OC
2 Setting the time and the date
¼ "Setting the time and date", page 18
2x ) Pr oG
3 Modify an hourly programme
¼ "Modify an hourly programme", page 19
3x ) Co un
4 Meters
¼ "Counters", page 15
4x ) PA rA
5 Setting parameters
¼ "Reading out measured values", page 14
5x ) Er bL
6 Failure history
¼ "Message and error history", page 26
6x ) Co dE
7 Installer parameters
¼Refer to the installation and service manual
C003493-A
1 4
3 4
1 2
C003203-D
1x
3
1 4
3 4
1 2
MENU MODE
C003204-B
1x
2x
3x
.
.
.
1 4
3 4
1 2
MENU MODE
3. Description TWH 200E TWH 300E TWH 300EH
13 03/02/2014 - 7605313-001-02