Using the control panel, Audio indicators – Datamax-O'Neil OC-3 SERIES User Guide User Manual
Page 17
U
SING
THE
CONTROL
PANEL
13
Using the control panel
The tables on the following pages document the following:
•
Audio Indicators on page 13
•
Battery Status LED on page 14
•
Power Button/LED on page 15
•
Media Function Button/LED on page 15
•
Radio Button/LED on page 16
•
•
CardReader Audio Indicators on page 16
Audio Indicators
Beep(s)
Description
Action
1 short
Printer wakes up.
None.
2 short
Out of paper.
Install paper.
3 short
Low battery.
Charge battery.
1 very short RF power is on.
Note:
This beep occurs when you
press the RF power button and
the RF power was off.
None.
2 very short RF power is off.
Note:
This beep occurs when you
press the RF power button and
the RF power was on.
None.
1 long
Boot code is starting or
restarting.
Redownload firmware.
8 short
CRC error in firmware.
Redownload firmware.
Figure Radio
Button/LED
Figure Power
Button/LED
Figure Battery
Status LED
Figure
Reset
Button
Figure Media
Function
Button/LED
- MF8I 270 User Guide (20 pages)
- MF8I Installation Guide (18 pages)
- MF8I Truck Mount Cable (2 pages)
- MF8I Locking Mounting Bracket (2 pages)
- MF8I Economy Mounting Bracket (2 pages)
- MF8I AN-15 (Line Printer and Easy Print Modes) (7 pages)
- MF8I AN-16 (Single Byte Character Set Font File Format) (8 pages)
- MF8I Quick Reference Programming Guide (72 pages)
- MF8I Configuration Program Installation (1 page)
- MF8I Bluetooth Management Component for Wavelink Avalanche (10 pages)
- A-Class Mark II Operator’s Manual (160 pages)
- A-Class Mark II Installation (2 pages)
- A-Class Mark II DMXrfNetIII (16 pages)
- A-Class Mark II DMXrfNetII (16 pages)
- A-Class Mark II RFID Quick Start Guide (6 pages)
- A-Class Mark II Programmer’s Manual (334 pages)
- ANDES 3 User Guide (32 pages)
- ANDES 3 Quick Start Guide (2 pages)
- ANDES Series Programmer’s Manual (67 pages)
- APEX 2 User Guide (28 pages)
- APEX 2 Quick Start Guide (2 pages)
- APEX 3 User Guide (27 pages)
- APEX 3 Quick Start Guide (2 pages)
- APEX 4 User Guide (30 pages)
- APEX 4 Quick Start Guide (2 pages)
- E-Class Mark III Operator’s Manual (90 pages)
- E-Class Mark III 4xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III 3xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III Paper Menu (7 pages)
- E-Class Mark III DPL Programmer’s Manual (296 pages)
- E-Class Mark III Printhead Bracket and Screw Upgrade (11 pages)
- H-Class Operator’s Manual (180 pages)
- Static brush (2 pages)
- H-Class Media Retainer (1 page)
- H-Class Thermal Transfer Option (12 pages)
- H-Class RFID Option (8 pages)
- H-Class Powered Internal Rewind Option (10 pages)
- H-Class Internal Rewind Option (6 pages)
- H-Class Present Sensor Option (8 pages)
- H-Class Peel & Present Option (8 pages)
- H-Class Linear Scanner Option (26 pages)
- H-Class HD Peel & Present Option (10 pages)
- H-Class HD Cutter Option (12 pages)
- H-Class GPIO Option (14 pages)
- H-Class Cutter Option (10 pages)