Datamax-O'Neil E-Class Mark III 4xxxxxxx Operator’s Manual - Manual (Page 46)

40 Appendix A – Specifications
Media / Ribbon
Media Types Roll-Fed, Die-Cut, Continuous, Fan-Fold
Max. Media Width 4.4 inches (110mm)
Min. Media Width 0.75 inches (19mm)
Max. Print Width
203 DPI Models: 4.25 inches (108mm)
300 DPI Models: 4.12 inches (106mm)
Print Length Range .236 – 99 inches (6 - 2514mm)
Minimum Label Height
Tear: 0.5 inches (12mm)
Peel: 1.0 inches (25mm)
Cut: 1.18 inches (30mm)
Media Thickness Range
.0025 - .01 inches (.064 - .254mm); up to .005 inches (.127mm) with
optional Cutter
Media Supply Roll Capacity 5 inches (127mm) O.D. on a 1 inch (25.4mm) core
Ribbon Width Range
½” Core Ribbons
Ribbon Core Width: 4.3 inches (110mm)
Ribbon Width: 1.0 - 4.3 inches (25 - 110mm); Centered on core
1” Core Ribbons (with Ribbon Core Adapters, see section 2.4.1.)
Ribbon Core Width: 1.0 - 4.3 inches (25 - 110mm); Centered on
Ribbon Core Adapters
Ribbon Width: 1.0 - 4.3 inches (25 - 110mm); Centered on core
Ribbon Roll Capacity
0.5” (13mm) core with 361’ (110m) long ribbon or 1" (25mm) core
with 984' (300m) long ribbon
Communications
Interface Ports (standard) USB, RS-232 (DB-9)
Baud Speed 600 to 38,400 bits per second (BPS)
Handshaking Xon/Xoff, CTS, DTR
Parity Even, Odd, or None
Stop Bits 1 or 2
Data Bits 7 or 8
Fonts
9 Bit Mapped Fonts rotated 0, 90, 180, and 270 degrees.
Embedded Bar Codes
32 embedded barcodes (see the DPL Programmer’s Manual for a detailed listing).