CEMB USA N300 - Manual (Page 75)

List of symbols used for the instrument E - 1
Appendix E
List of symbols used for the instrument
Functions accessed from the main screen
vibration measurement (vibrometer)
balancing
instrument’s operating parameter settings
Functions accessed from the additional functions bar
open the recorded measurements page
display a list of the highest vibration peaks present
open the calibration procedure (self-learning) for the current balancing
operation
open the calibration procedure (self-learning) for a new balancing operation
value of test mass used in the current self-learning step of the balancing
operation
angular position of test mass used in the current self-learning step of the
balancing operation
save the current measurement in the records
load and display the measurement selected from the records
delete the measurement selected from the records
empty the records (delete all measurements)