General – CEMB USA K10 (D) User Manual
Page 3
533
99
0
860
I 0215 - 3
GB
1- GENERAL
1.1 - GENERAL SAFETY RECOMMENDATIONS
- The wheel balancing machine should only be used by duly authorized and trained personnel.
- The wheel balancing machine should not be used for purposes other than those described in
the instruction manual.
- Under no way should the wheel balancing machine be modified except for those modifications
made explicitly by CEMB.
- Never remove the safety devices. Any work on the machine should only be carried out by
specialist personnel.
- Avoid using strong jets of compressed air for cleaning.
- Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
- Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the
adapter.
- The machine operator should avoid wearing clothes with flapping edges. Make sure that
unauthorized personnel do not approach the machine during the work cycle.
- Avoid placing objects inside the base as they could impair the correct operation of the machine.
- Correct head disassembly (also see exploded drawings): the weight-holder head is anchored to
the bed on the front side with snap-fitting clips; on the rear side, it is secured by a safety screw
accessed by removing the control panel.
1.1.1 - STANDARD SAFETY DEVICES
- Stop push button for stopping the wheel under emergency conditions.
- The wheel guard is not compulsory since the balancing speed is less than 100 min
-1.
1.2 - FIELD OF APPLICATION
The machine is designed for balancing wheels of car, light commercial vehicles or motorcycle, weighing less
than 65 Kg. It can be operated in the temperature range of 0° to + 45° C.
The following functions are provided: Double operator; ALU-S; SPLIT; Unbalance optimization; Self
diagnostics; Self-calibration
1.3 - OVERALL DIMENSIONS
Fig. 1