Castle TSM-21 Serial 64234 and above (Bosch) Operator Manual - Manual (Page 9)

CASTLE, INC TSM-21 OWNERS MANUAL V2.0 Page 9 of 41
2 Machine Safety
The Castle Model TSM-21 pocket machine was designed with operator safety as a priority. This
machine was carefully prepared for shipment at our factory. Upon receipt of this machine,
inspect for shipping damage. Report any damage IMMEDIATELY to the freight company, your
Castle dealer and to Castle, Inc. DO NOT attempt to operate this machine if you observe any
physical damage. If you detect any damage to your machine contact Castle, Inc. at 800-282-
8338 for instructions.
2.1 Safety Rules
The Castle Model TSM-21 Pocket Machine was designed with operator safety as a priority,
which is why Castle highly recommends the following:
1. USE CAUTION WHEN OPERATING THIS MACHINE! Only skilled operators should
use this machine, or be within ten feet when the machine is in operation.
2. Read the Operator Manual carefully before operating. An Operator Manual should be
attached to this machine. It contains important information and warnings concerning the
use and operation of this machine. Improper use of this machine may result in serious
injuries to persons and property.
3. Always wear protective eyewear when operating or standing near an operating machine.
4. Be certain that this machine is properly grounded before operating it.
5. Keep all body parts away from the moving parts of this machine whether it is in operation
or at rest.
6. Do not place hands or fingers between the work piece and the clamp or near the cutters
at any time. Always use a securing device when undertaking close work.
7. Do not wear gloves or loose clothing (such as sweaters, jackets, or jewelry) when
operating or standing near an operating machine.