2 inventory – Castle TSM-21 Serial 64234 and above (Bosch) Operator Manual User Manual
Page 10

CASTLE, INC
TSM-21 OWNERS MANUAL V2.0
Page 10 of 41
8.
Keep two hands on the work piece when initiating a pocket cycle on this machine.
9.
Before attempting adjustments, maintenance, or repair, TURN OFF this machine,
disconnect it from its power source and air supply. Wait for all motion to stop.
Failure to disconnect this machine from its power source and air supply or wait for all
motion to stop could result in electrocution or injury.
10.
Always keep the area around this machine clean and uncluttered. Poor housekeeping
could result in slips, falls, or other injuries.
11.
Concentrate at all times. Failure to pay attention to the task at hand is the cause of
most accidents.
2.2 Inventory
With your Castle machine you should have received the following:
CASTLE TSM-21 POCKET CUTTER MACHINES HARDWARE PACK
Part #
Part Description
Qty
S90021
TSM-21 Operator Manual with Warranty Activation Card
1
Router Wrench Bosch 1617
2
Trimmer Wrench Bosch PR10E
2
B00622
#2x 6” Square Driver Bit
1
G00234
Bit Gauge
1
G00101
Door Spring
2
F14125
¼ x 20 Bolt
2
H00141
T-handle 2