Schreiber Chillers Modular Chillers - Manual (Page 48)

48
ALARM HISTORY
THIS DISPLAYS THE LAST 20 ALARM FAULT CODES.
DATE AND TIME
Date / Time Settings:
THIS SETS THE CURRENT DATE AND TIME
SENSOR CALIBRATION
Head Pressure #1
Current: Current head pressure reading
Off set: 00 psi offset value
Min: 000 Psi Max: 415
Head Pressure #2
Current: Current head pressure reading
Off set: 00 psi offset value
Min: 000 Psi Max: 415
Discharge Temp
Current: Discharge temperature current reading
Offset: 00.0 Offset value
Return Temp #1
Current: Discharge temperature current reading
Offset: 00.0 Offset value
Return Temp #2
Current: Discharge temperature current reading
Offset: 00.0 Offset value
Sensor Failure Alarms
Enable delay
Head 1: EN 002 sec
Head 2: EN 002 sec
Sensor Failure Alarms
Enable delay
Discharge: EN 002 sec
Outside: EN 002 sec
Sensor Failure Alarms
Enable delay
Return 1: EN 002 sec
Return 2: EN 002 sec
DIG-IN CALIBRATION
High Pressure #1
Enabled: Yes
Current: Closed Delay
Alarm if: Open 01 s
Low Pressure #1
Enabled: Yes
Current Closed Delay
Alarm if: Open 01s
High Pressure #2