Schreiber Chillers Modular Chillers - Manual (Page 39)

39
pump_set_1
+--------------------+
|Recirc Pumps: Lead 1| THIS SCREEN SETS THE PUMPS OPERATION AND WHEN
|Rotation Day: 000 | “LEAD1, LEAD2, ROTATION”
| Hour: 00 |
| Minute: 00 |
+--------------------+
pump_set_2
+--------------------+
|Process Pumps:Lead 1|
|Rotation Day: 000 | THIS SCREEN SETS THE PUMPS OPERATION AND WHEN
| Hour: 00 |
“LEAD1, LEAD2, ROTATION”
| Minute: 00 |
+--------------------+
pump_set_3
+--------------------+
| Flow Delays | THIS SETS THE INITIAL TIME DELAY FOR FLOW SWITCH
|Recirc Pumps: 000s| ALARM
|Process Pumps: 000s|
| |
+--------------------+
comp_set_1
+--------------------+
| COMPRESSOR SETTINGS| THIS SETS THE MINIMUN OFF/ON FOR THE COMPRESSORS
|Minimum On: 000s|
|Minimum Off: 000s|
| |
+--------------------+
comp_set_3
+--------------------+
| COMPRESSOR CONTROL | THIS SETS THE COMPRESSOR OPERATION CONTROL AND
|Type:Prop | INTEGRATION TIME. P, PI, PID
|Integration: 000s|
| |
+--------------------+
fan_set_1
+--------------------+
|CONDENSER FAN CONFIG| THIS SETS THE SETPOINT FOR THE FAN ACTIVATION
|Number of fans:0 |
|Set point: 000psi|
|Band: 000psi|
+--------------------+
system_set_1
+--------------------+
| FACTORY SETTINGS |
| | THIS SETS THE UNIT OF MEASUREMENT FOR TEMPERATURE
|Temperature Unit: ЯF|
| |
+--------------------+