Schreiber Chillers Modular Chillers - Manual (Page 46)

46
Control Section:
Factory default setting
Under Main Menu
CURRENT
STATUS
CURRENT ALARMS
USER SETTINGS
RUN HOURS
FACTORY SETTINGS
ALARM HISTORY
DATE AND TIME
SENSOR CALIBRATION
DIG-IN CALIBRATION
MANUAL CONTROL
CURRENT STATUS –
THESE ARE ONLY INFORMATION SCREENS – NOTHING CAN BE CHANGE
Running Status
Re-Pumps: off 1; 2
Proc-Pumps: off 1;2
Comps: 1,2,3,4
Process Status
Discharge: Discharge temperature reading
Return #1: Return #1 temperature reading
Demand: _______%
Modular#_ Status
Head Press1: Head pressure reading circuit #1
Head Press2: Head pressure reading circuit#2
Compressors: 1 & 2
Modular#_ Status
Inlet Temperature: Chiller temperature (F)
Outlet Temperature: Chiller Outlet Temperature (F)
Demand: ________%
Modular#_ Status
Condensers Fan On: 1,2,3
System On/Off
System: OFF / ON - THIS IS THE ONLY SCREEN TO TURN ON THE SYSTEM
CURRENT ALARMS
THIS SCREEN SHOWS ALARM FAULT CODE
USER SETTINGS
Setpoints – The customer can change this setting based on their requirement.
Discharge: 47.0
0
F
Hist: 1.5
0
F
Setpoints – The customer can change this setting based on their requirement.
RUN HOURS
Run Hours