Schreiber Chillers MC75AC - Manual

MC75 - AC
PLEASE NOTE: We are shipping with this unit, a 20-mesh
strainer.
This 1” NPT strainer must be installed on the return line when
installing this controller, and it will be necessary to clean,
depending on the condition of the cooling water.
Please give special attention to the cleanliness of the water you
use in this mold controller. See installation instructions on Page
6, paragraph 3. It will help prolong the life of this controller.
TABLE OF CONTENTS
Model ………………………………………………………………………………………………
1
Caution. ………………………………………………………………………………………..…. 2
Safety Summary…………………………………………………………………………………… 3
Wiring Diagram..…………………………………………………………………………………. 4
Description of Operation…………………………………………………………………… …... 5
MC75 Control Panel……………………………………………………………………………… 6
Installation Instructions ………………………………………………………………………… 7
Water Pump ……………………………………………………………………………………… 9
Maintenance Information - Part I ……………………………………………………………... 13
Parts ……………………………………………………………………………………………… 14
Limited Warranty ………………………………………………………………………………... 15
Schreiber Engineering
Division of Dova Tech, Ltd.
12111 East Park Street, Cerritos CA 90703
Phone (562) 926-3855 Fax (562) 926-0969