Q.V.P. Veneer Softener - Manual (Page 2)

(Material Safety Data Sheet)
product name: Veneer Softener
Read and understand this before using or handling product.
Emergency phone#: (740)763-2886
Product Type: Adhesive Modifier
General product use: veneer plasticizer
_______________________________________________________________________________
_______________________________________________________________________________
CHEMICAL HAZARD RATING
Health=2 (moderate) Fire=2 (moderate) Reactivity=0 (least)
_________________________________________________________________________________
_________________________________________________________________________________
Section One--Hazardous Ingredients
The ingredients listed below have been associated with one or more of the listed immediate and/or
delayed(*) health hazards. Risk of damage and effects depends upon duration and level of exposure. Before
using or handling, read and understand the MSDS
Chemical Name CAS Number
Diethylene Glycol Monoethyl Ether 111-90-0
see footnote C
•
OSHA PEL: None Established
•
ACGIH TLV: None Established.
Footnote C:As of the date of issuance of this document, this material has not been listed by NTP, IARC or
OSHA as a carcinogen.
__________________________________________________________________________________
Section Two--Physical Data
•
Appearance and odor: Clear, colorless liquid with mild, pleasant odor.
•
Storage life: 1 Year @ 25C (77F)
•
49CFR 173.150 Comb.lqd.exemption: combustible
•
Boiling Point: 202C(395F)
•
Evaporation Rate: ~0.01 (n-butyl acetate=1)
•
Flash Point: ~91C (196F)
•
Freezing Point: <-70C
•
Autoignition Temperature: Not available
•
Lower explosion limit: 1.2 vol.% @ 182C
•
Upper explosion limit: 23.5 vol.% @ 182C
•
Solubility in water: complete
Specific Gravity: .98 @ 25C
•
Vapor Density: ~4.65
•
Vapor Pressure: .26mm hg @25C
_____________________________________________________________________________________